Snapshots of advanced QRA software 

Accidental release of hazardous chemicals

1. Plume, Puff, Spill Dispersions based on Gaussian dispersion calculations and modeling, with tabular and graphic display with 6-User defined Isopleths in XY-Slice at Y-Cross wind distance. Full 3-D “CAT-Scan” output possible with dispersion “Cake slicing in XY (Isopleth)  Graphs. Graphics are in colour. It is a complete CAT-Scan with Probits (PROBIT short for Probability Unit, is the percent Fatality and Injury due to exposure to any hazardous agent.). This Advanced Dispersion provides for Mass and volumes of various concentration zones and concentration zone shells of Plumes, Puffs and Spill pool evaporation dispersions.

2. Free spread Pool fire, Dyke Pool fire, Tank fire, jet fire, fireball, flash fire, with PROBITs. Graphics are in colour
3. UVCE, BLEVE, Under ground explosions, mechanical explosions-cylindrical vessel, spherical vessel, Dust explosion with PROBITs. Graphics are in colour. 
4. FAR, FN-Curve, ISO-Risk, Individual Risk computations,Risk levels from 10^-2 to 10^-10. 

     Graphics mapping are in colour   

         I.      Graphs can be plotted to scale on Site Maps
both in Graphics and AutoCAD .dwg files.  

Help on how to do BLEVE simulations

BLEVE (Boiling Liquid Expanding Vapour Explosion) scenarios
A BLEVE is an explosion caused by a liquid, which is boiling and continuing to produce vapour.If the chemical is flammable, it is likely that the resulting cloud of the substance will ignite after the BLEVE has occurred, forming a fireball and possibly a fuel-air explosion. BLEVEs, which result in very large fireballs, occur when process vessels containing flammable materials with high vapour pressures are exposed to significant external heat. 

If Liquid is flammable flashing liquid or flammable liquid

BLEVE scenarios

Under explosion scenario options

1. Tank-over heating by external source or Mechanical Explosion leading to BLEVE scenario (CnE)  

2. Tank-over heating by external source or Mechanical Explosion puff delayed internal ignition leading to Unconfined vapour cloud explosion BLEVE scenario (UCE)"

Under fire scenario options

2. Tank over heating by external source puff Immediate Edge Ignition leading to Fire Ball leading to BLEVE scenario

 If Liquid is non-flammable

Mechanical Explosion scenario

Under explosion scenario options

1. Tank-over heating by external source leading to Mechanical Explosion (CnE)

Watch QRA software package Demo on YouTube

1. Dispersion (1 of 4) https://youtu.be/Ov56DCsqXkI

2. Explosion (2 of 4) https://youtu.be/bj-hrYyh1Mo

3. Fire (3 of 4) https://youtu.be/13O1J7PFnBY

4. Risk Assessment (4 of 4) https://youtu.be/NVswC5uKp10

1  Dispersion modeling

2. Explosion modeling

3. Fire modeling

4. Risk Assessment modeling